Dell Vostro 2510 Service Manual - Page 67
Replacing the Battery Latch Assembly
View all Dell Vostro 2510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
1 battery release button 2 alignment bracket screw (1) 3 battery latch assembly 4 spring Replacing the Battery Latch Assembly CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. NOTICE: Ensure the battery latch assembly is properly oriented. The indent for the screw should face up when installing the assembly. This procedure assumes that you have completed the removal procedure Removing the Battery Latch Assembly. 1. Ensure that the battery latch spring is properly mounted on the guide post of the battery latch assembly. 2. Align the battery release button with the hole in the battery latch assembly, then press the button into place. 3. Replace the M2 x 3-mm screw that holds the battery release button in the battery latch assembly. 4. Align the guide post on the battery latch assembly with the slot on the base of the computer, then lower the latch assembly into place. NOTICE: The battery release button is keyed to ensure proper alignment. If you feel resistance, check the alignment of the release button. 5. Replace the system board (see Replacing the System Board Assembly). 6. Connect the cable that secures the internal card with Bluetooth wireless technology to the system board (see Replacing the Card). 7. Replace the optical drive (see Replacing the Optical Drive). 8. Replace the palm rest (see Replacing the Palm Rest). 9. Replace the display assembly (see Replacing the Display Assembly). 10. Replace the keyboard (see Replacing the Keyboard).