Dell Vostro 2510 Service Manual - Page 53
Replacing the Fingerprint Reader - wireless on or off
View all Dell Vostro 2510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
3 underside of palm rest 4 fingerprint reader 5 fingerprint reader connector with retaining bracket 6 fingerprint reader cable Replacing the Fingerprint Reader CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. NOTICE: Ensure that the touch pad cable and the cable for the internal card with Bluetooth® wireless technology are properly routed before snapping the palm rest into place. This procedure assumes that you have completed the removal procedure Removing the Fingerprint Reader. 1. Position the fingerprint reader on the underside of the palm rest. 2. Connect the fingerprint reader cable connector to the fingerprint reader connector and rotate the retaining bracket downward to secure the cable. 3. Replace the fingerprint reader cover and replace the M2 x 3-mm screw that secures the cover to the palm rest. 4. Replace the palm rest (see Replacing the Palm Rest). 5. Replace the display assembly (see Replacing the Display Assembly). 6. Replace the keyboard (see Replacing the Keyboard). 7. Replace the hinge cover (see Replacing the Hinge Cover). 8. Replace the WLAN card (see Replacing a WLAN Card). 9. Replace the hard drive cover. See Removing the Hard Drive for an illustration of the hard drive cover. Back to Contents Page