Dell W5300n Dell™ Workgroup Laser Printer W5300 User's Guide - Page 63
envelopes with the stamp area enters the envelope feeder first. Let the envelopes at the bottom of
View all Dell W5300n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
4. Flex a stack of envelopes back and forth and then straighten the edges on a level surface. Press down the corners to flatten them. Fan the envelopes. This prevents the edges of the envelopes from sticking together and helps them feed properly. NOTE: When you load envelopes, do not exceed the maximum stack height of 64.7 mm (2.55 in.). The envelope feeder holds a maximum of 85 envelopes (75 g/m2, 20 lb bond). 5. Load the stack of envelopes flap side down with the stamp area and the flap on the left. The end of the envelopes with the stamp area enters the envelope feeder first. Let the envelopes at the bottom of the stack slide into the envelope feeder slightly more than the ones at the top of the stack. NOTICE: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self-stick adhesives. These envelopes may severely damage the printer. See Envelopes for more information.