Dell XPS /Dimension Gen 5 Owner's Manual - Page 102
Diskette Drive, Connect the other end of the data cable to the DSKT connector on the system board see
View all Dell XPS /Dimension Gen 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
www.dell.com | support.dell.com power cable tabs (2) floppy drive 4 Attach the power and data cables to the floppy drive. 5 Connect the other end of the data cable to the DSKT connector on the system board (see page 77). 6 Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents. 7 Close the computer cover (see page 121). NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer. 8 Connect your computer and devices to electrical outlets, and turn them on. See the documentation that came with the drive for instructions on installing any software required for drive operation. 9 Enter system setup (see page 127) and update the appropriate Diskette Drive option. 10 Verify that your computer works correctly by running the Dell Diagnostics (see page 58). 102 Removing and Installing Parts