Dell XPS /Dimension Gen 5 Owner's Manual - Page 95
Installing a Hard Drive
View all Dell XPS /Dimension Gen 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
3 Disconnect the power and hard-drive cables from the drive and from the system board. hard-drive cable power cable tabs (2) hard drive system board connector 4 Press in on the tabs on each side of the drive and slide the drive up and out. Installing a Hard Drive 1 Unpack the replacement hard drive, and prepare it for installation. 2 Check the documentation for the drive to verify that it is configured for your computer. 3 If your replacement hard drive does not have the bracket rails attached, remove the rails from the old drive by removing the two screws that secure each rail to the drive. Attach the bracket rails to the new drive by aligning the screw holes on the drive with the screw holes on the bracket rails and then inserting and tightening all four screws (two screws on each rail). drive bracket rails (2) screws (4) Removing and Installing Parts 95