Dell XPS One 2720 XPS 27 2720 Owners Manual - Page 51
Removing the Processor Heat-Sink Fan, Prerequisites, Procedure
View all Dell XPS One 2720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Removing the Processor Heat-Sink Fan WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 11. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Prerequisites 1 Remove the back cover. See "Removing the Back Cover" on page 17. 2 Remove the system-board shield. See "Removing the System-Board Shield" on page 31. Procedure 1 Disconnect the processor heat-sink fan cable from the system board. 2 Remove the screws that secure the processor heat-sink fan to the middle cover. 3 Lift the processor heat-sink fan and slide it out off the tab on the hard-drive cage. 1 2 1 screw (3) 3 processor heat-sink fan 3 2 processor heat-sink fan cable Removing the Processor Heat-Sink Fan | 51