Dell XPS One 2720 XPS 27 2720 Owners Manual - Page 84
Removing the Middle Cover, Prerequisites
View all Dell XPS One 2720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Removing the Middle Cover WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 11. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. WARNING: The middle cover is heavy when the components are attached to it. It is recommended that two people remove and replace the middle cover while the components are attached to it. Prerequisites 1 Remove the back cover. See "Removing the Back Cover" on page 17. 2 Remove the trim cover. See "Removing the Trim Cover" on page 19. 3 Remove the stand. See "Removing the Stand" on page 21. 4 Follow the instructions from step 1 to step 2 in "Removing the Hard Drive" on page 35. 5 Remove the hard-drive cage. See"Removing the Hard-Drive Cage" on page 38. 6 Follow the instructions from step 1 to step 2 in "Removing the Optical Drive" on page 25. 7 Remove the I/O panel. See "Removing the I/O Panel" on page 40. 8 Remove the system-board shield. See "Removing the System-Board Shield" on page 31. 9 Remove the inner frame. See "Removing the Inner Frame" on page 49. 10 Follow the instructions from step 1 to step 5 in "Removing the I/O-Board" on page 67. 11 Remove the processor heat-sink fan. See "Removing the Processor Heat-Sink Fan" on page 51. 12 Remove the processor heat-sink. See "Removing the Processor Heat-Sink" on page 53. 13 Remove the power-supply fan. See "Removing the Power-Supply Fan" on page 33. 14 Remove the power-supply unit. See "Removing the Power-Supply Unit" on page 58. 15 Remove the converter board. See "Removing the Converter Board" on page 23. 16 Follow the instructions from step 1 to step 3 in "Removing the System Board" on page 77. 84 | Removing the Middle Cover