Dell XPS One 2720 XPS 27 2720 Owners Manual - Page 87
Replacing the Middle Cover, Procedure
View all Dell XPS One 2720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Replacing the Middle Cover WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 11. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Procedure 1 Align the screw holes on the middle cover with the screw holes on the display bezel. 2 Replace the screws that secure the middle cover to the display bezel. 3 Route all the cables through their routing guides on the middle frame. 4 Connect the LVDS and touchscreen cables to the display assembly. 5 Replace the screw that secures the grounding cable to the middle cover. 6 Align the screw holes on the side I/O-board shield with the screw holes on the display bezel and place the side I/O-board shield on the side-I/O board. 7 Replace the screws that secure the side I/O-board shield to display bezel. Replacing the Middle Cover | 87