Dell XPS One 2720 XPS 27 2720 Owners Manual - Page 53
Removing the Processor Heat-Sink, Prerequisites, Procedure
View all Dell XPS One 2720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Removing the Processor Heat-Sink WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 11. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Prerequisites 1 Remove the back cover. See "Removing the Back Cover" on page 17. 2 Remove the system-board shield. See "Removing the System-Board Shield" on page 31. Procedure 1 Remove the screw that secures the cooling vents and the grounding cable to the middle cover. 2 In sequential order (indicated on the processor heat-sink), loosen the captive screws that secure the processor heat-sink to the system board. 3 Lift the processor heat-sink off the system board. 1 2 3 4 5 1 grounding cable 3 cooling vents 5 captive screws (4) 2 screw 4 processor heat-sink Removing the Processor Heat-Sink | 53