Dell XPS One 2720 XPS 27 2720 Owners Manual - Page 52
Replacing the Processor Heat-Sink Fan, Procedure, Postrequisites
View all Dell XPS One 2720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Replacing the Processor Heat-Sink Fan WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 11. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Procedure 1 Slide the processor heat-sink fan under the tab on the hard-drive cage and align the screw holes on the processor heat-sink fan with the screw holes on the middle cover. 2 Replace the screws that secure the processor heat-sink fan to the middle cover. 3 Connect the processor heat-sink fan cable to the system board. Postrequisites 1 Replace the system-board shield. See "Replacing the System-Board Shield" on page 32. 2 Replace the back cover. See "Replacing the Back Cover" on page 18. 3 Follow the instructions in "After Working Inside Your Computer" on page 13. 52 | Replacing the Processor Heat-Sink Fan