Dell XPS One 2720 XPS 27 2720 Owners Manual - Page 56
Replacing the Processor, Procedure
View all Dell XPS One 2720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Replacing the Processor WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 11. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Procedure 1 Ensure that the release lever on the processor socket is fully extended in the open position. CAUTION: You must position the processor correctly in the processor socket to avoid permanent damage to the processor. 2 Align the notches on the processor with the tabs on the processor socket. 3 Align the pin-1 corner on the processor with the pin-1 corner on the processor socket, and then place the processor in the processor socket. CAUTION: Ensure that the processor-cover notch is positioned underneath the alignment post. 4 When the processor is fully seated in the socket, close the processor cover. 5 Pivot the release-lever down and place it under the tab on the processor cover. 1 23 45 1 processor pin-1 indicator 3 alignment tabs (2) 5 processor-cover notch 7 release lever 6 7 2 processor 4 alignment post 6 processor cover 56 | Replacing the Processor