Dell XPS One 2720 XPS 27 2720 Owners Manual - Page 60
Replacing the Power-Supply Unit, Procedure, Postrequisites
View all Dell XPS One 2720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Replacing the Power-Supply Unit WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 11. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Procedure 1 Align the screw holes on the power-supply unit with the screw holes on the middle cover and replace the screws that secure the power-supply unit to the middle cover. 2 Connect the power-supply fan cable, power-supply indicator cable, and power-port cable to the power-supply unit. 3 Route the main power-supply cable and processor power-supply cable through their routing guides. 4 Connect the main power-supply cable and processor power-supply cable to the system board. Postrequisites 1 Replace the system-board shield. See "Replacing the System-Board Shield" on page 32. 2 Replace the I/O panel. See "Replacing the I/O Panel" on page 41. 3 Replace the stand. See "Replacing the Stand" on page 22. 4 Replace the trim cover. See "Replacing the Trim Cover" on page 20. 5 Replace the back cover. See "Replacing the Back Cover" on page 18. 6 Follow the instructions in "After Working Inside Your Computer" on page 13. 60 | Replacing the Power-Supply Unit