Epson 410W User's Guide - Page 63
Pnote Pnote, starts as soon as you plug in the power cord. You don't - ceiling mount
UPC - 010343873407
View all Epson 410W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
■ User's Logo Turn on to display the image or logo you have captured whenever the projector is turned on. See page 67 details. ■ Projection Front: Projector is in front of the screen. Front/Ceiling: Projector is in front of the screen, mounted upside-down from a wall, whiteboard mounting, or ceiling. Rear: Projector is behind the screen. Rear/Ceiling: Projector is behind the screen, mounted upside-down from the ceiling. To change from Front to Front/Ceiling or Rear to Rear/Ceiling, press and hold the A/V Mute button on the remote control for five seconds. ■ Operation Direct Power On: When this feature is enabled, projection starts as soon as you plug in the power cord. You don't have to press the P Power button. Sleep Mode: When enabled, the projector turns off the lamp if it has not received any input signals for a period of time (as defined in the Sleep Mode Timer setting). Sleep Mode Timer: When Sleep Mode is on, you can set the period of time before the projector turns off automatically, from 1 to 30 minutes. High Altitude Mode: When using the projector at an altitude above 4,921 feet (1,500 m), turn this setting on to ensure that the internal temperature of the projector is regulated properly. Turn this setting off for lower elevations. ■ Standby Mode Select Network On to allow the projector to be monitored over a network when the projector is in standby mode (the P Power light is orange). ■ Language Select the language to be used for the projector menus. 4. When you're finished, press Esc or Menu. note Logo settings cannot be changed if the User's Logo Protect feature has been turned on. See page 68. note When Direct Power On is turned on, press the P Power button to turn the projector off, wait until the P Power light turns a steady orange, then unplug the power cord. Fine-tuning the Projector 63