Epson 410W User's Guide - Page 90
Solving Problems with the Remote Control
UPC - 010343873407
View all Epson 410W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
30° 30° 20 feet (6 m) Solving Problems with the Remote Control The projector doesn't respond to remote control commands. ■ Make sure you are within 20 feet (6 m) of the projector, and within range of the projector's front or back sensor. The effective range is approximately 30° to the left or right, 30° above or below the rear sensor, and 60° above the front sensor (below, if mounted upside-down). 60° 30° 30° 30° 30° 20 feet (6 m) 20 feet (6 m) 20 feet (6 m) ■ If a button on the remote control is held for more than 30 seconds, the remote enters sleep mode. Press another button for normal operation. ■ The remote control batteries may not be installed correctly or may be low on power. Replace the batteries as described on page 51. ■ Dim the room lights and turn off any fluorescent lights. Make sure the projector is not in direct sunlight. Strong lighting, especially fluorescent lights, may affect the projector's infrared receivers. If you still have trouble using the remote control, disable one of the remote receivers using the Settings menu to block interference from bright light. See page 60 for details. ■ Turn off any nearby equipment that emits infrared energy, such as a radiant room heater. You have lost the remote control. You need the remote control to access many projector features. If you have lost it, you can order another from Epson; see page 92 for details. 90 Solving Problems