Epson 410W User's Guide - Page 96
Selecting Network Settings
UPC - 010343873407
View all Epson 410W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Selecting Network Settings Follow the instructions in this section to set up the projector's network settings in the menu system. 1. Press the Menu button. 2. Select the Network menu. 3. Press Enter. Then use the up and down arrow buttons and the Enter button to set the following options: ■ Wired LAN If your network assigns addresses automatically, turn on the DHCP setting. If your network does not assign addresses automatically, turn off DHCP and enter the projector's IP Address, Subnet Mask, and Gateway Address as needed. To enter numbers, use the numeric buttons on the remote control. ■ PJLink Password Lets you enter a password for using the PJLink™ protocol to control the projector. ■ Web Control Password Lets you enter a password for accessing the projector over the web from a computer running the EMP Monitor software. 96 Monitoring the Projector Over a Network