Epson 410W User's Guide - Page 65
Displays the video signal format., composite and S-Video - projector problems
UPC - 010343873407
View all Epson 410W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
■ Lamp Hours Displays the number of hours the lamp has been used. The life span of the lamp ranges from about 3000 hours in High brightness mode to about 4000 hours in Low brightness mode. If the number shown is close to 3000 or the information is displayed in red, make sure you have a spare lamp handy. ■ Source Displays the input source currently being projected. ■ Input Signal (computer, RGB video, and component video) Displays the input signal setting. ■ Resolution (computer, RGB video, and component video) Displays the input resolution. ■ Video Signal (composite and S-Video) Displays the video signal format. ■ Refresh Rate (computer, RGB video, and component video) Displays the refresh rate. ■ Sync Info (computer, RGB video, and component video) Provides information that may be needed by the service technician. ■ Status Displays informations about projector problems. This information may be needed if service is required. 3. When you're finished, press Esc or Menu. note The lamp usage timer doesn't register until you've used the lamp for at least 10 hours. Fine-tuning the Projector 65