Epson BrightLink 436Wi User Manual - Page 167
Maintaining and Transporting the Projector, Projector Maintenance, Cleaning the Lens Cover Glass
View all Epson BrightLink 436Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Maintaining and Transporting the Projector Follow the instructions in these sections to maintain your projector and transport it from place to place. Projector Maintenance Transporting the Projector Projector Maintenance Your projector needs little maintenance to keep working at its best. You may need to clean the lens periodically, and clean the air filter and air vents to prevent the projector from overheating due to blocked ventilation. The only parts you should replace are the lamp, air filter, and remote control batteries. If any other part needs replacing, contact Epson or an authorized Epson servicer. Warning: Before cleaning any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except as specifically explained in this manual. Dangerous electrical voltages in the projector can injure you severely. Warning: Do not try to service this product yourself, except as specifically explained in this manual. Refer all other servicing to qualified servicers. Cleaning the Lens Cover Glass Cleaning the Projector Case Air Filter and Vent Maintenance Projector Lamp Maintenance Replacing the Remote Control Batteries Replacing the Pen Batteries Replacing the Pen Tips Parent topic: Maintaining and Transporting the Projector Cleaning the Lens Cover Glass Clean the projector's lens cover glass periodically, or whenever you notice dust or smudges on the surface. • To remove dust or smudges, gently wipe the lens cover glass with lens-cleaning paper. 167