Epson BrightLink 436Wi User Manual - Page 196
Solving Interactive Problems, Solutions When \
View all Epson BrightLink 436Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
• If you lose the remote control you cannot enter a password. Order a new one from Epson. Parent topic: Solving Projector or Remote Control Operation Problems Solving Interactive Problems Check the solutions in these sections if you have problems using the interactive system. Solutions When "Hardware Device Not Found" Message Appears Solutions When "Error Occurred in the Easy Interactive Function" Message Appears Solutions When the Interactive Pens Do Not Work Solutions When Manual Calibration is Difficult Solutions When the Built-In Toolbar (PC Free Annotation)Does Not Work Solutions When the Interactive Pen Position Is Not Accurate Solutions When the Interactive Pens Are Slow or Difficult to Use Solutions When the Interactive Pens Cause Interference or Unwanted Effects Parent topic: Solving Problems Solutions When "Hardware Device Not Found" Message Appears If the "Hardware device not found" message appears, try the following solutions: • Check the USB cable connection from the projector to your computer. Try disconnecting and then reconnecting the cable. • If you are projecting from a laptop computer, make sure the battery has enough power, or connect the laptop to a power outlet. • If your USB cable is installed in the wall, try connecting a different USB cable to the projector and your computer. Parent topic: Solving Interactive Problems Solutions When "Error Occurred in the Easy Interactive Function" Message Appears If the "Error occurred in the Easy Interactive Function" message appears, contact Epson for help. Parent topic: Solving Interactive Problems Related references Where to Get Help 196