Epson BrightLink 436Wi User Manual - Page 29
Projection Distance, Projection, Parent topic
View all Epson BrightLink 436Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Wall-mounted Wherever you set up the projector, make sure to position it squarely in front of the screen, not at an angle. If you project from the ceiling or wall, or from the rear, be sure to select the correct Projection option in the projector's menu system. Note: Interactivity is not available when using rear or rear ceiling projection. Parent topic: Projector Placement Projection Distance The distance at which you place the projector from the screen determines the approximate size of the image. The image size increases the farther the projector is from the screen, but can vary depending on the zoom factor, aspect ratio, and other settings. Refer to the tables in the Installation Guide to determine approximately how far to place the projector from the screen based on the size of the projected image. (Conversion figures may have been rounded up or down.) You can also use the projector Throw Distance Calculator at www.epson.com/support (U.S.) or www.epson.ca/support (Canada). Parent topic: Projector Placement 29