Epson Endeavor User Setup Information - Page 31
Setting the Video Display Type, setting for the one you want to be your primary display
View all Epson Endeavor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Setting the Video Display Type The Video option lets you define the type of adapter you are using for your primary display. If you connected your monitor to the computer's built-in VGA port, select EGA/VGA. If you installed an optional video card, follow the guidelines in the table below to select the correct adapter type. Video display type options Select If EGA/VGA* You connected your monitor to the built-in VGA port or you installed a VGA or enhanced graphics adapter (EGA) card CGA 40 You installed an optional color graphics adapter that is set to 40-column CGA mode CGA 80 You installed a color graphics adapter (CGA) or a multi-mode graphics adapter (MGA) attached to a color monitor; be sure to set the color/mono switch on the MGA card to color MONO You installed a monochrome display adapter (MDA) or an MGA attached to a monochrome monitor; be sure to set the color/mono switch on the MGA card to mono For a composite color monitor, such as a color television with a video input, try selecting CGA 80. If the monitor's resolution is poor, run SETUP again and select CGA 40. If you have two display adapters of different types, select the setting for the one you want to be your primary display adapter. The other one is your secondary adapter. If you installed an EGA display adapter card, or another type of card that you want to be the primary display adapter, you must set jumper J6 on the main system board to position 2-3 to disable the built-in VGA interface. Running the SETUP Program 2-5