Epson MX-80II User Manual - Page 25

Fig. 20 Laying Printer on Firm Surface, Prepare tools

Page 25 highlights

(e) Avoid use of the Printer in humid locations or in the vicinity of heat generating sources such as heater, etc. Fig. 20 Laying Printer on Firm Surface (2) Removal of protective paper for paper end detector The MX-80 F/T Type II is provided with a protective paper inserted between the inner and outer paper guides to protect the paper end detector from damage due to shocks or vibrations during transportation. Before using the Printer, be sure to remove this paper. If the MX-80 F/T Type II is to be reshipped, remember to return it to the original position. (3) Prepare tools Prepare the following two tools to disassemble or assemble the printer. (1) Phillips type screwdriver 1 pc. (2) Round-blade type screwdriver 1 pc. -19-

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103

(e) Avoid use of the Printer in humid locations or in the vicinity of heat
generating sources such as heater, etc.
Fig. 20 Laying Printer on Firm Surface
(2)
Removal of protective paper for paper end detector
The MX-80 F/T Type II is provided with a protective paper inserted between
the inner and outer paper guides to protect the paper end detector from
damage due to shocks or vibrations during transportation. Before using the
Printer, be sure to remove this paper. If the MX-80 F/T Type II is to be
reshipped, remember to return it to the original position.
(3) Prepare tools
Prepare the following two tools to disassemble or assemble the printer.
(1) Phillips type screwdriver
1 pc.
(2) Round-blade type screwdriver
1 pc.
-19-