Epson MX-80II User Manual - Page 91
Initialization takes place automatically each time the primary AC power source
View all Epson MX-80II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
1.3. Power circuit The power circuit generates 5V DC for the logic circuit, and 24V DC to energize the solenoids of the print head and two stepper motors. 1.4. Printer initialization Printer initialization is accomplished in either of the two ways described below. (1) Initialization takes place automatically each time the primary AC power source is interrupted and reapplied (i.e., by turning the Power Switch off and on). (2) Initialization may be initiated remotely by activating the INIT signal to the parallel interface connector. This line should be driven by a TTL driver or its equivalent.
1.3. Power circuit
The power circuit generates 5V DC for the logic circuit, and 24V DC to energize
the solenoids of the print head and two stepper motors.
1.4. Printer initialization
Printer initialization is accomplished in either of the two ways described below.
(1)
Initialization takes place automatically each time the primary AC power source
is interrupted and reapplied (i.e., by turning the Power Switch off and on).
(2) Initialization may be initiated remotely by activating the INIT signal to the
parallel interface connector. This line should be driven by a TTL driver or its
equivalent.