Fluke 1586A/2HC Product Manual - Page 119
GX CRC error
View all Fluke 1586A/2HC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
7 Error Messages and Troubleshooting Error Messages Error Code Error -102 Error 0 Error 100 Error 101 Error 102 Error 103 Error 104 Error 105 Error 106 Error 107 Error 108 Table 7-1. Error Messages (cont.) Error Message Causes and Solutions Syntax error No error Cause: Invalid syntax was found in the command string. Solution: Check the parameter value and try again. Cause: Error queue is empty. No action necessary. Acknowledgement queue full Cause: GX acknowledgement queue overflow. Note GX is the abbreviation for Guard Crossing - which is the communication link between the inguard and outguard. Solution: Instrument will restart the GX. Inguard not responding (recv) Cause: Inguard not responding (receive). Solution: Instrument will restart the GX. Lost sync with inguard Cause: Lost sync with inguard. Solution: Instrument will restart the GX. Inguard not responding (send) Cause: Inguard not responding (send). Solution: Instrument will restart the GX. Oversize packet received Cause: Oversize packet received. Solution: The packet will be ignored automatically. GX CRC error Cause: CRC error detected. Solution: No user action necessary. The packet will be ignored automatically. Wrong ACK number Cause: An ACK packet was received with unexpected ACK number. Solution: No user action necessary. The Instrument will restart the GX. Info packet received; link not active Cause: An INFO packet was received, but the communication has not been setup. Solution: No user action necessary. The packet will be ignored automatically. Cause: A packet was received with unknown control byte. Unknown control byte Solution: No user action necessary. Instrument will restart the GX. 7-5 MyFlukeStore Shop for Fluke products online at: www. .com 1.888.610.7664