Fluke 1586A/2HC Product Manual - Page 35
Power On and Standby
View all Fluke 1586A/2HC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
1586A Users Manual Power On and Standby As shown in Figure 2-4, the Product has a main power switch located on the rear panel that supplies power to the unit, and a Standby key () on the front panel that puts the Product in a standby mode. Push the (I) side of the main power switch to power on the Product. As the Product powers on, a startup screen is shown on the display while the Product performs a self-check. This self-check can take up to 2 minutes to complete and if the Product detects any errors, an error message is shown on the display that contains the error description along with an error code to help troubleshoot the problem (see "Error Messages" in Chapter 7). Once the Product is powered on, use the Standby key () to put the Product in standby. When in standby, the display, keys, and functions are disabled while the internal components remain powered on and warmed up (see "Warm-Up the Product"). Standby Key Figure 2-4. Main Power Switch and Standby Key Main Power Switch hcn052.eps 2-6 MyFlukeStore Shop for Fluke products online at: www. .com 1.888.610.7664