Fluke 1586A/2HC Product Manual - Page 55
Basic Channel Operations
View all Fluke 1586A/2HC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
1586A Users Manual Basic Channel Operations Use the instructions in this section to perform basic channel operations. Open the Channel Setup Menu The Channel Setup menu lets the user manage channels, verify inputs, and also set up tests. To open the menu, push on the front panel. To select channels, use the and arrow keys. To quickly move up and down the list of channels, use the and arrow keys. Note The Channel Setup menu cannot be accessed while a scan is in progress. Table 3-3. Channel Setup Menu 3 4 2 1 5 hcn017.eps Item Function Module indicator that has two bars to show which Input Modules are connected and registered. The top indicator is slot 1 and the bottom indicator is slot 2. When a module is in a slot, the indicator is green. When a slot is empty, the indicator is white. Channel status. When ON, the channel can be configured and the channel status indicator to the left of the channel is green. When OFF, the channel information is not shown and the channel status indicator is white. List of available channels. Channels show in the list only when an Input Module relay card is installed in a slot or a DAQ-STAQ Multiplexer is connected. For example, Ch201 through Ch222 will not show in the channel list until an Input Module relay card is installed into slot 2. Note Ch001 is always the front-panel terminals and always shows in the channel list. 3-12 MyFlukeStore Shop for Fluke products online at: www. .com 1.888.610.7664