Home » Fujitsu Manuals » Scanners » Fujitsu 6240 » Manual Viewer

Fujitsu 6240 Operating Guide - Page 143

Brake roller, Pick roller, Plastic roller, Glass, Ultrasonic sensor, Replacing the Brake Rollers. - review

UPC - 097564307270

Add to My Manuals
Save this manual to your list of manuals

Page 143 highlights

4.3 Cleaning the ADF Brake roller Lightly clean the Brake roller along the grooves on the roller taking care not to scratch the roller surface. When cleaning the Brake roller, remove it from the scanner. For how to remove the Brake Roller, see Section "5.3 Replacing the Brake Rollers." Pick roller Lightly clean the Pick roller along the grooves on the roller taking care not to scratch the roller surface. Take particular care in cleaning this roller as black debris on it adversely affects the pickup performance. Plastic roller Lightly clean the Plastic roller taking care not to damage the roller surface. Take particular care when cleaning this roller as black debris on it affects document pick performance. Be careful not to damage the sponges attached around the middle of the roller. Glass Clean lightly. HINT If the glass is dirty, vertical streaks may apper in the scanned images. Ultrasonic sensor Clean lightly with a dry cloth. With the movie below, review the procedure to clean the Brake roller, Pick roller, Plastic roller, and ADF glass surfaces: file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/04/c04_03_01.htm (3 of 5)9/28/2007 2:39:22 PM

Section	Page
Local Disk	1
6.3 Remedying Typical Troubles	168
6.3 Remedying Typical Troubles	169
6.4 Items to Check Before Contacting the Dealer Where You Bought the Scanner	186
6.5 Checking Labels on the Scanner	189
Chapter 7 ADF AND PAPER SPECIFICATION	190
7.1 Document Size	191
7.2 Document Quality	192
7.3 Maximum Document Loading Capacity	195
7.4 Area Not to be Perforated	196
7.5 Multifeed Detection Conditions	197
Chapter 8 SCANNER SETTINGS	199
8.1 Scanner Settings	200
8.2 Power Saving Setting	205
8.3 Offset/Scan Scale	206
8.4 Multifeed Detection	208
8.5 Page Edge Filler	214
8.6 Dropout Color	216
8.7 Pre-Pick	218
8.8 Intelligent Multifeed Setting	220
8.9 Paper Feeding Retry Times	222
8.10 Life Counter Setting	223
8.11 Timeout for Manual Feeding	225
8.12 Power ON/OFF Control Setting	227
8.13 Paper Protection Setting	229
8.14 Paper Protection Detection Level Setting	231
Chapter 9 SCANNER SPECIFICATION	233
9.1 Basic Specifications	234
9.2 Installation Specifications	236
9.3 External Dimensions	237
APPENDIX 1 Before Using the [Scan] or [Send to] Button	238

Match case Limit results 1 per page

4.3 Cleaning the ADF

Brake roller

Lightly clean the Brake roller along the grooves on the roller taking care not to scratch the roller surface.

When cleaning the Brake roller, remove it from the scanner. For how to remove the Brake Roller, see Section "

5.3

Replacing the Brake Rollers.

Pick roller

Lightly clean the Pick roller along the grooves on the roller taking care not to scratch the roller surface. Take particular

care in cleaning this roller as black debris on it adversely affects the pickup performance.

Plastic roller

Lightly clean the Plastic roller taking care not to damage the roller surface. Take particular care when cleaning this

roller as black debris on it affects document pick performance. Be careful not to damage the sponges attached around

the middle of the roller.

Glass

Clean lightly.

HINT

If the glass is dirty, vertical streaks may apper in the scanned images.

Ultrasonic sensor

Clean lightly with a dry cloth.

With the movie below, review the procedure to clean the Brake roller, Pick roller, Plastic roller, and ADF glass surfaces:

file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/04/c04_03_01.htm (3 of 5)9/28/2007 2:39:22 PM