Fujitsu 6240 Operating Guide - Page 194
Automatic Document Feeder., 10 Correcting Skewed Documents.
UPC - 097564307270
View all Fujitsu 6240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
7.2 Document Quality q It is recommended that the front side of the card be placed face down in the Automatic Document Feeder. q The card to be scanned should be within the ISO7810 compliance, type ID-1. Dimensions: 3.4 inch (height) x 2.1 inch (width)/ 86 mm x 54 mm Thickness: 0.056 inches / 1.4 mm or less Material: PVC (Poly vinyl chloride) or PVCA (Polyvinyl chloride acetate) Note: Before scanning your card, test with a dummy card of the same material to see if it can be fed into the ADF properly. q Cards that are excessively rigid or less flexible may not feed smoothly and excessive noise may occur. Note: If the cards do not feed smoothly, try: - Scanning one card at a time. - Enabling [Automatic Paper Size Detection]. For how to configure this setting, see Section "3.10 Correcting Skewed Documents." - Raising the resolution. q Cards should be clean from oil and without labels. q Cards cannot be scanned when the imprinter is installed. All Rights Reserved. Copyright 2007 © PFU LIMITED file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/07/c07_02_01.htm (3 of 3)9/28/2007 2:38:43 PM