Home » Fujitsu Manuals » Scanners » Fujitsu 6240 » Manual Viewer

Fujitsu 6240 Operating Guide - Page 144

Feed roller/Eject roller - scanner reviews

UPC - 097564307270

Add to My Manuals
Save this manual to your list of manuals

Page 144 highlights

4.3 Cleaning the ADF Feed roller/Eject roller 1) Open the ADF when the indication of the Function Number display is not "P" or "0". If you open the ADF when the indication of the Function Number display is "P" or "0", the Feed rollers/Eject rollers will not rotate even you perform the operation of step 2 below. 2) Simultaneously hold down the [Send to] and [Scan] buttons on the Operator Panel. The Feed rollers/Eject rollers start to rotate slowly. 3) Hold a soft cloth moistened with cleaning fluid against the surface of the rotating Feed rollers so that it lightly cleans the surface of the rollers. Take particular care when cleaning these rollers as black debris on these rollers affects pickup performance. As a guideline, seven presses of the [Send to] and [Scan] buttons make the Feed rollers/Eject rollers to rotate one full turn. [Send to] Button [Scan] Button CAUTION In step 2, all the Feed rollers/Eject rollers turn at the same time. When cleaning the Feed rollers or Eject rollers, be careful not to touch the other rotating Feed rollers/Eject rollers. With the movie below, review the procedure to clean the Feed rollers/Eject rollers: file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/04/c04_03_01.htm (4 of 5)9/28/2007 2:39:22 PM

Section	Page
Local Disk	1
6.3 Remedying Typical Troubles	168
6.3 Remedying Typical Troubles	169
6.4 Items to Check Before Contacting the Dealer Where You Bought the Scanner	186
6.5 Checking Labels on the Scanner	189
Chapter 7 ADF AND PAPER SPECIFICATION	190
7.1 Document Size	191
7.2 Document Quality	192
7.3 Maximum Document Loading Capacity	195
7.4 Area Not to be Perforated	196
7.5 Multifeed Detection Conditions	197
Chapter 8 SCANNER SETTINGS	199
8.1 Scanner Settings	200
8.2 Power Saving Setting	205
8.3 Offset/Scan Scale	206
8.4 Multifeed Detection	208
8.5 Page Edge Filler	214
8.6 Dropout Color	216
8.7 Pre-Pick	218
8.8 Intelligent Multifeed Setting	220
8.9 Paper Feeding Retry Times	222
8.10 Life Counter Setting	223
8.11 Timeout for Manual Feeding	225
8.12 Power ON/OFF Control Setting	227
8.13 Paper Protection Setting	229
8.14 Paper Protection Detection Level Setting	231
Chapter 9 SCANNER SPECIFICATION	233
9.1 Basic Specifications	234
9.2 Installation Specifications	236
9.3 External Dimensions	237
APPENDIX 1 Before Using the [Scan] or [Send to] Button	238

Match case Limit results 1 per page

4.3 Cleaning the ADF

Feed roller/Eject roller

1) Open the ADF when the indication of the Function Number display is not "P" or "0".

If you open the ADF when the indication of the Function Number display is "P" or "0", the Feed rollers/Eject rollers

will not rotate even you perform the operation of step 2 below.

2) Simultaneously hold down the [Send to] and [Scan] buttons on the Operator Panel.

The Feed rollers/Eject rollers start to rotate slowly.

3) Hold a soft cloth moistened with cleaning fluid against the surface of the rotating Feed rollers so that it lightly

cleans the surface of the rollers. Take particular care when cleaning these rollers as black debris on these rollers

affects pickup performance. As a guideline, seven presses of the [Send to] and [Scan] buttons make the Feed

rollers/Eject rollers to rotate one full turn.

[Send to] Button

[Scan] Button

CAUTION

In step 2, all the Feed rollers/Eject rollers turn at the same time. When cleaning the Feed

rollers or Eject rollers, be careful not to touch the other rotating Feed rollers/Eject rollers.

With the movie below, review the procedure to clean the Feed rollers/Eject rollers:

file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/04/c04_03_01.htm (4 of 5)9/28/2007 2:39:22 PM