Home » Fujitsu Manuals » Scanners » Fujitsu 6240 » Manual Viewer

Fujitsu 6240 Operating Guide - Page 215

Specify the length for each end top, bottom, right, and left, to fill the end s.

UPC - 097564307270

Add to My Manuals
Save this manual to your list of manuals

Page 215 highlights

8.5 Page Edge Filler 3. Specify the length for each end section; top, bottom, right, and left, to fill the end sections. ADF T: Top edge=0 to 15 mm D: Bottom edge=-7 to 7 mm R: Right edge=0 to 15 mm L: Left edge=0 to 15 mm (can be set in increments of 1 mm) FB Top edge=0 to 15 mm Bottom edge=0 to 15 mm Right edge=0 to 15 mm Left edge=0 to 15 mm (can be set in increments of 1 mm) The specified areas are filled with white when the backing (background) is white, and with black when the backing is black. HINT Unless otherwise specified, the background color is white. You can also change it to the "Black background" using the scanner driver. If you are using the TWAIN driver, do the following to change the background color to black: Select the [Option] button, and then select [Black background] from [Automatic Size and Skew detection] on the [Rotation] tab. ATTENTION Note that if the Page Edge Filler is too wide, some characters in the vicinity of the boundary may be cut out. All Rights Reserved. Copyright 2007 © PFU LIMITED file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/08/c08_05_01.htm (2 of 2)9/28/2007 2:38:54 PM

Section	Page
Local Disk	1
6.3 Remedying Typical Troubles	168
6.3 Remedying Typical Troubles	169
6.4 Items to Check Before Contacting the Dealer Where You Bought the Scanner	186
6.5 Checking Labels on the Scanner	189
Chapter 7 ADF AND PAPER SPECIFICATION	190
7.1 Document Size	191
7.2 Document Quality	192
7.3 Maximum Document Loading Capacity	195
7.4 Area Not to be Perforated	196
7.5 Multifeed Detection Conditions	197
Chapter 8 SCANNER SETTINGS	199
8.1 Scanner Settings	200
8.2 Power Saving Setting	205
8.3 Offset/Scan Scale	206
8.4 Multifeed Detection	208
8.5 Page Edge Filler	214
8.6 Dropout Color	216
8.7 Pre-Pick	218
8.8 Intelligent Multifeed Setting	220
8.9 Paper Feeding Retry Times	222
8.10 Life Counter Setting	223
8.11 Timeout for Manual Feeding	225
8.12 Power ON/OFF Control Setting	227
8.13 Paper Protection Setting	229
8.14 Paper Protection Detection Level Setting	231
Chapter 9 SCANNER SPECIFICATION	233
9.1 Basic Specifications	234
9.2 Installation Specifications	236
9.3 External Dimensions	237
APPENDIX 1 Before Using the [Scan] or [Send to] Button	238

Match case Limit results 1 per page

8.5 Page Edge Filler

Specify the length for each end section; top, bottom, right, and left, to fill the end sections.

ADF

Top edge=0 to 15 mm

Bottom edge=–7 to 7 mm

Bottom edge=0 to 15 mm

Right edge=0 to 15 mm

Left edge=0 to 15 mm

(can be set in increments of 1 mm)

The specified areas are filled with white when the backing (background) is white, and with black when the backing is

black.

HINT

Unless otherwise specified, the background color is white. You can also change it to the

“Black background” using the scanner driver.

If you are using the TWAIN driver, do the following to change the background color to black:

Select the [Option] button, and then select [Black background] from [Automatic Size and

Skew detection] on the [Rotation] tab.

ATTENTION

Note that if the Page Edge Filler is too wide, some characters in the vicinity of the boundary

may be cut out.

file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/08/c08_05_01.htm (2 of 2)9/28/2007 2:38:54 PM