Fujitsu 6240 Operating Guide - Page 203

8.1 Scanner Settings Item Multifeed Page edge filler Explanation Select the method to detect Multifeed. (Check either of overlapping or document length, or both of document length and overlapping) Fill the end sections of a specified-mm-wide with white or black on the scanned image. When the backing (background) color is white, the end sections are filed with white; and when the background color is black, filled with black. Selectable parameter None/Check Overlapping [Ultrasonic]/ Check Length/Check Overlapping and Length. Selectable length (to be detected as length difference): 10, 15 or 20 mm ADF: Top/left/right: 0-15 mm Bottom: -7 to 7 mm (can be set in increments of 1 mm) FB: Top/bottom/left/right:0-15 mm Default Check overlapping Top/Bottom/ Left/Right: 0 mm Dropout Color Prepick Document check area specification for Multifeed Detection Drop out a preselected color for the scanned image. (Binary black & white/ grayscale mode only) To give a higher priority to processing speed, select [Yes], if not, select [No]. Selected range: This is checked when limiting the range of detecting multifeeds. You can determine if mulfifeed detection is enabled or disabled in the specified area. Start: The start point of the check area in length (mm) from top edge of the document is specified. (A: Image areaB: Filled area A+B: Area to be output) Red/Green/Blue/None Yes/No Checking of selected range Enable/Disable (when the selected range is checked) 0 to 510 mm (with 2 mm increment) Green Yes Do not check Disable 0 mm End: The end point of the check area in length (mm) from top edge of the document is specified. 0 to 510 mm (with 2 mm increment) 0 mm file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/08/c08_01_01.htm (4 of 5)9/28/2007 2:38:49 PM