Fujitsu 6240 Operating Guide - Page 159
Attach the Pick roller shaft to the scanner.
UPC - 097564307270
View all Fujitsu 6240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
5.4 Replacing the Pick Roller Pick roller shaft Screw Slot Pick roller ATTENTION Make sure that the Pick roller is correctly attached. The incompletely-attached Pick roller might cause document jams or other feed errors. When attaching the Pick roller to the shaft, make sure that the roller's tab clicks into place. 7. Attach the Pick roller shaft to the scanner. Attach the Pick roller shaft to the scanner in reverse order of removing. 1) Set the right side of the Pick roller into place first, then fix the left side of the roller. 2) Rotate the Pick roller lever in the direction of the arrow. Lever file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/05/c05_04_01.htm (4 of 5)9/28/2007 2:39:38 PM
5.4 Replacing the Pick Roller
Pick roller shaft
Screw
Slot
Pick roller
ATTENTION
Make sure that the Pick roller is correctly attached. The incompletely-attached Pick roller
might cause document jams or other feed errors.
When attaching the Pick roller to the shaft, make sure that the roller’s tab clicks into place.
7.
Attach the Pick roller shaft to the scanner.
Attach the Pick roller shaft to the scanner in reverse order of removing.
1) Set the right side of the Pick roller into place first, then fix the left side of the roller.
2) Rotate the Pick roller lever in the direction of the arrow.
Lever
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/05/c05_04_01.htm (4 of 5)9/28/2007 2:39:38 PM