Fujitsu 6240 Operating Guide - Page 77
Scanning Documents of Different Widths, Center all documents as shown in the below. - roller
UPC - 097564307270
View all Fujitsu 6240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
3.4 Scanning Documents of Different Widths fi-6140 / fi-6240 Image Scanner Operator's Guide TROUBLESHOOTING CONTENTS MAP TOP 3.4 Scanning Documents of Different Widths When you scan documents of different widths at one time from the ADF, some documents that are small in paper size may be skewed or may not be fed into the scanner. It is recommended that only documents of the same width be scanned at one time. In the case where you have to scan documents of different widths together, scan them, following the procedure below. 1. To prevent images from skewing, select [Automatic Page Size Detection] from the [Automatic Size and Skew Detection] drop-down list. For details, see Section "3.10 Correcting Skewed Documents." 2. Center all documents as shown in the figure below. 3. Place the documents on the ADF paper chute, and then adjust the side guides so that they lightly touch the widest sheets of paper. ATTENTION When placing a stack of documents on the scanner, make sure that all documents are directly under the pick roller. Off-center documents, which are not under the pick roller, cannot be fed into the scanner. 4. Scan the documents. For information about how to scan documents, see Section "2.6 How to Use ScandAll PRO." All Rights Reserved. Copyright 2007 © PFU LIMITED file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/03/c03_04_01.htm9/28/2007 2:38:23 PM