Garmin GPS 72 Owner's Manual - Page 34
User Waypoint List. If you would like to save a Map Feature Point as a User Waypoint - user manual
UPC - 689076719087
View all Garmin GPS 72 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
InRterofedruecntcioen Main Menu Routes Create Route Options 32 Create Route Options Use Map - This displays the Map Page with the Map Pointer active. You can now point at any location or point on the map, and enter it into the route. When using the Map to create a route, you can select an existing User Waypoint/Map Feature, or you can create a 'New' Waypoint. New Waypoints are created if you place the Map Pointer on a location that is not a Map Feature. A "New Waypoint" will be stored in the User Waypoint List and can be edited as any other User Waypoint. When placing a "New Waypoint" in a route, you will have to press ENTER to create the waypoint, ENTER to save the waypoint and ENTER a final time to insert it into the route. If you place the Map Pointer on a Map Feature, the GPS 72 will only store that location in the route using the feature name as a reference. These points are not stored in the User Waypoint List. If you would like to save a Map Feature Point as a User Waypoint, highlight the point in the route, press ENTER, this will display an Information Page. With the Information Page displayed, press MENU and select 'Save as Waypoint'. Add Waypoint - This will display the Points Menu (see page 28 for information on the Points Menu). As a note, if you highlight the dashed line in the waypoint field on the Route Page and press ENTER it is the same as making this selection. Use the Points Menu to display an Information Page, then highlight the 'OK' Button and press ENTER. Using a combination of the Map Page and Route Page - You can create a route using a combination of the methods described above. Starting with a blank Route Page, either enter a waypoint manually or press the MENU Key and select 'Use Map'. You can select 'Use Map' at any time while creating a route. After you have finished using the map, press QUIT to display the Route Page where you can continue entering waypoints manually.