Home » HP Manuals » Fax Machines » HP 1040 » Manual Viewer

HP 1040 User Guide - Page 30

DO NOT try to send documents that are:, Set document resolution and contrast for a single copy - printer

UPC - 884962546512

Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Set document resolution and contrast for a single copy • If you are sending more than one sheet, make sure the bottom sheet enters first. Insert the sheets with a slight push to ensure smooth feeding. • For multiple sheets, all pages of the document must be the same size and paper type. • If you are loading pages that are unusually thick or thin, feed one sheet at a time. If the document does not feed correctly, open the control panel, remove the document, and try loading it again. DO NOT try to send documents that are: • wet • covered with wet ink or paste • wrinkled, curled, or folded • too thin (less than 0.07 mm (0.18 in.) thick-onionskin, airmail paper, etc.) • too thick (more than 0.15 mm (0.38 in.) thick-index cards, file folders) • chemically processed (pressure-sensitive paper, carbon-coated paper, etc.) • coated (glossy, etc.) • too small or short (such as a label, voucher, etc.) • made of cloth or metal To send these documents, use an office copier to make a photocopy first, and then send the copy. Set document resolution and contrast for a single copy Document resolution and contrast are set in the same manner for both faxes and copies. For most faxes and copies, default settings will work well. If you need to send/copy a document with unusual contrast characteristics, including photographs, you can adjust the resolution and contrast for that document using the control panel buttons. TIP: You can also change the default settings for all documents using the menu. See BASIC FAX menu on page 13. We recommend you use documents printed using a high quality printer, felt tip pen, black ink, or typewriter. The paper should be white or very light, and of normal weight, not cardboard or onionskin. Blue lines on a ruled pad don't fax well. For more information on the types of paper you can use for documents, see Document types and sizes on page 23. NOTE: You must set the resolution and contrast before dialing the number. 24 HP Fax basics

Section	Page
HP 1040/1050 Fax series	1
Load paper 1	3
Load documents to fax or copy 2	3
Send a fax 2	3
Receive a fax 3	3
Make a copy 3	3
Make a telephone call 4	3
The HP Fax 1040/1050 6	3
The menus 12	3
Overview of menu options 13	3
Loudspeaker-HP 1040 Fax 16	3
Speakerphone-HP 1050 Fax 16	3
Navigate the menus 17	3
Enter dates, times, text, and telephone numbers 18	3
Speed dialing 21	3
Paper types and sizes 23	3
Document types and sizes 23	3
Set document resolution and contrast for a single copy 24	3
Adjust volume 25	3
Automatic fax redial 26	3
Receiving via an extension telephone (HP 1040 Fax only) 26	3
Set rings to answer 27	4
Use Caller ID 28	4
Block junk fax numbers 28	4
Scan & Fax Mode 29	4
Image TCR 29	4
Distinctive ring (DRPD) 30	4
Answer/receive mode 31	4
Turn on the message center 35	4
Record your greeting 36	4
Play your greeting 36	4
Screen or monitor your calls 37	4
Announcement only 37	4
Play back messages 37	4
Erase messages 38	4
Remote Access 39	4
Message paging 41	4
Record a conversation 41	4
Broadcasting 43	4
Delayed fax 44	4
Polling 45	4
To cancel the scheduled job 46	4
Forward faxes 47	4
Set the date and time 49	5
Turn on and off sounds 49	5
Set the fax header information 50	5
Print reports 51	5
Reprinting faxes 52	5
Clearing memory 53	5
Loudspeaker-HP 1040 Fax 53	5
Speakerphone-HP 1050 Fax 53	5
Redial a number in memory 54	5
Print cartridge information 55	5
View ink level 55	5
Print the self test 56	5
Replace the print cartridge 56	5
Clear jammed documents and paper 58	5
Maintain the print cartridge 59	5
Clean the document scanner area 61	5
Adjust the scanner 63	5
LCD error messages 63	5
Troubleshooting 66	5
Paper types and sizes 71	5
Document types and sizes 71	5
Print cartridge 72	5
Product specifications 72	5
A sample of ITU #1 test chart (reduced to 60.5%) 74	5
Environmental product stewardship program 75	5
Regulatory notices 76	5
Declaration of conformity 78	6
Use Hewlett-Packard support services 79	6
Hewlett-Packard LIMITED WARRANTY STATEMENT 80	6
Quick start	7
Load paper	7
Load documents to fax or copy	8
Send a fax	8
Receive a fax	9
FAX or TAM answer mode	9
AUTO answer mode	9
TEL answer mode	9
Make a copy	9
Single copy-default settings	9
Multiple copies or copies with options/settings	9
Make a telephone call	10
HP Fax basics	11
The HP Fax 1040/1050	12
Parts of the HP Fax	12
Control Panel of HP FAX	13
The menus	18
Overview of menu options	19
BASIC FAX menu	19
ADVANCED FAX menu	20
SET UP SOUND menu	21
TOOLS menu	21
SET UP TAM menu	21
Loudspeaker-HP 1040 Fax	22
Speakerphone-HP 1050 Fax	22
Navigate the menus	23
Ready mode	23
Menu buttons	23
Enter dates, times, text, and telephone numbers	24
Most text fields	24
Fax header telephone number	25
Speed dialing	27
Store a number in the phone book	27
Print the phone book	28
Dial from the phone book	28
One-touch dialing	28
Speed dialing	28
Phone book dialing	28
Search sequentially through the phone book	28
Search for a particular first letter	28
Paper types and sizes	29
Document types and sizes	29
DO NOT try to send documents that are:	30
Set document resolution and contrast for a single copy	30
Adjust volume	31
Ringer volume	31
Speaker volume	31
Automatic fax redial	32
Receiving via an extension telephone (HP 1040 Fax only)	32
Additional features	33
Set rings to answer	33
Use Caller ID	34
Turn Caller ID on	34
See who called with Caller ID	34
Print a list of Caller ID numbers	34
Block junk fax numbers	34
Add a junk fax number	34
Delete a number	35
Scan & Fax Mode	35
Image TCR	35
Distinctive ring (DRPD)	36
Step 1-Teach the HP Fax the ring pattern	36
Step 2-Set up distinctive ring (DRPD) answer mode	37
Answer/receive mode	37
HP1040 Fax	37
HP1050 Fax	38
Digital message center (HP 1050 Fax only)	41
Turn on the message center	41
Record your greeting	42
Play your greeting	42
Screen or monitor your calls	43
Announcement only	43
Play back messages	43
Play back new messages only	43
Play back all messages	43
Skip or repeat messages	43
Repeating a message or skipping backwards	43
Skipping a message	44
Erase messages	44
Erase selected messages	44
Erase all messages in memory	44
Remote Access	45
Remote Password	45
Access the message center	45
Toll Saver	46
Message paging	47
Set up message paging	47
Receive a message page	47
Record a conversation	47
Advanced faxing	49
Broadcasting	49
Delayed fax	50
Polling	51
Setting send polling	51
Polling another fax to receive	52
To cancel the scheduled job	52
Forward faxes	53
Feature reference	55
Set the date and time	55
Turn on and off sounds	55
Alarm sounds	55
Key sounds	56
Silent mode	56
Set the fax header information	56
Print reports	57
Automatic reports	57
Reports you can print	57
Reprinting faxes	58
Clearing memory	59
Loudspeaker-HP 1040 Fax	59
Speakerphone-HP 1050 Fax	59
Redial a number in memory	60
Care and maintenance	61
Print cartridge information	61
View ink level	61
Print the self test	62
Replace the print cartridge	62
Clear jammed documents and paper	64
Document jams during transmission	64
To clear document jam:	64
Paper jams during printing	64
If the paper is jammed in the printing area	64
If the paper is jammed in the paper feed area	65
Maintain the print cartridge	65
Clean the print cartridge nozzles	65
Wipe the print nozzles and contacts	65
Clean the nozzles	65
Clean the cartridge carrier contacts	66
Clean the document scanner area	67
Adjust the scanner	69
LCD error messages	69
Troubleshooting	72
Fax problems	72
Print quality problems	74
Digital Message Center problems	75
Specifications and regulatory information	77
Paper types and sizes	77
Document types and sizes	77
Acceptable documents	77
Print cartridge	78
Product specifications	78
A sample of ITU #1 test chart (reduced to 60.5%)	80
Environmental product stewardship program	81
Regulatory notices	82
Declaration of conformity	84
Use Hewlett-Packard support services	85
Hewlett-Packard LIMITED WARRANTY STATEMENT	86

Match case Limit results 1 per page

HP Fax basics

Set document resolution and contrast for a single copy

•

If you are sending more than one sheet, make sure the bottom sheet enters first. Insert

the sheets with a slight push to ensure smooth feeding.

•

For multiple sheets, all pages of the document must be the same size and paper type.

•

If you are loading pages that are unusually thick or thin, feed one sheet at a time. If

the document does not feed correctly, open the control panel, remove the document,

and try loading it again.

DO NOT try to send documents that are:

•

wet

•

covered with wet ink or paste

•

wrinkled, curled, or folded

•

too thin (less than 0.07 mm (0.18 in.) thick—onionskin, airmail paper, etc.)

•

too thick (more than 0.15 mm (0.38 in.) thick—index cards, file folders)

•

chemically processed (pressure-sensitive paper, carbon-coated paper, etc.)

•

coated (glossy, etc.)

•

too small or short (such as a label, voucher, etc.)

•

made of cloth or metal

To send these documents, use an office copier to make a photocopy first, and then send

the copy.

Set document resolution and contrast for a single copy

Document resolution and contrast are set in the same manner for both faxes and copies.

For most faxes and copies, default settings will work well.

If you need to send/copy a document with unusual contrast characteristics, including

photographs, you can adjust the resolution and contrast for that document using the

control panel buttons.

TIP:

You can also change the default settings for all documents using the menu. See

BASIC FAX menu

on page 13.

We recommend you use documents printed using a high quality printer, felt tip pen,

black ink, or typewriter. The paper should be white or very light, and of normal weight,

not cardboard or onionskin.

Blue lines on a ruled pad don’t fax well. For more information on the types of paper you

can use for documents, see

Document types and sizes

on page 23.

NOTE:

You must set the resolution and contrast before dialing the number.