HP 1040 User Guide - Page 67

Clean the document scanner area - drivers

Page 67 highlights

CARE AND MAINTENANCE Clean the document scanner area Clean the document scanner area To keep your machine working properly, occasionally clean the white roller, document feeder rubber piece, and the scanning glass. If they are dirty, documents sent to another fax machine will not be clear. CAUTION: When you turn the power off to clean the scanner, documents stored in memory will be lost. 1. Open the control panel. 2. Remove the white roller. a. At the right-hand end of the white roller there is a bushing that is secured with a small tab. b. Push the tab slightly inward, then rotate towards you. Then pull up the right-hand end of the roller to remove it. 12 1 White roller 2 Drive roller 3 White roller latch CARE AND MAINTENANCE CARE AND MAINTENANCE CARE AND MAINTENANCE CARE AND MAINTENANCE CARE AND MAINTENANCE 3 3. Wipe the white roller surface and the driver roller surface with a soft cloth dampened with water. Care and maintenance 61 CARE AND MAINTENANCE

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94

C
ARE
AND
MAINTENANCE
C
ARE
AND
MAINTENANCE
C
ARE
AND
MAINTENANCE
C
ARE
AND
MAINTENANCE
C
ARE
AND
MAINTENANCE
C
ARE
AND
MAINTENANCE
C
ARE
AND
MAINTENANCE
Care and maintenance
61
Clean the document scanner area
Clean the document scanner area
To keep your machine working properly, occasionally clean the white roller, document
feeder rubber piece, and the scanning glass. If they are dirty, documents sent to another
fax machine will not be clear.
CAUTION:
When you turn the power off to clean the scanner, documents stored in
memory will be lost.
1.
Open the control panel.
2.
Remove the white roller.
a.
At the right-hand end of the white roller there is a bushing that is secured with a
small tab.
b.
Push the tab slightly inward, then rotate towards you. Then pull up the right-hand
end of the roller to remove it.
3.
Wipe the white roller surface and the driver roller surface with a soft cloth dampened
with water.
1
White roller
2
Drive roller
3
White roller latch
3
2
1