HP 1040 User Guide - Page 73

Paper Size, document in memory - fax machine troubleshooting

Page 73 highlights

CARE AND MAINTENANCE CARE AND MAINTENANCE Troubleshooting Problem Solution Spots or lines missing from the fax you receive. Check if the print cartridge is ok by making a copy. See Maintain the print cartridge on page 59. Check with the telephone company to see if your phone line is noisy. You are receiving poor quality copies. The fax machine sending to you may have a dirty scan glass. Also, check with the telephone company to see if your phone line is noisy. Some of the words on the fax you received appear stretched. The machine sending to you had a temporary document jam. Your machine does not make copies. Make sure your document is loaded face down. There are lines on copies or documents you send. Check your scan glass for marks and clean it (see Clean the document scanner area on page 61.) The machine dials a number, but fails The remote fax machine may be turned off or unable to answer to make a connection with a remote incoming calls. Speak with the other fax operator to solve the fax machine. problem. You cannot store a document in memory. There may not be enough memory available to hold the document you want to store. If the display shows a Memory Full message, do the following until you can store your document in memory: Print all unprinted faxes in memory (see Reprinting faxes on page 52.) Delete unneeded polling faxes, broadcast faxes, or delayed faxes (see To cancel the scheduled job on page 46.) Blank areas appear at the bottom of You may have selected the wrong paper size setting. To select each page or on continuation pages, the proper paper size, see Paper Size on page 13. with only a small strip of material printed at the top. Image TCR is not working You have the resolution set to SUPER FINE. Set the resolution to FINE. CARE AND MAINTENANCE CARE AND MAINTENANCE CARE AND MAINTENANCE CARE AND MAINTENANCE CARE AND MAINTENANCE Care and maintenance 67

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94

C
ARE
AND
MAINTENANCE
C
ARE
AND
MAINTENANCE
C
ARE
AND
MAINTENANCE
C
ARE
AND
MAINTENANCE
C
ARE
AND
MAINTENANCE
C
ARE
AND
MAINTENANCE
C
ARE
AND
MAINTENANCE
Care and maintenance
67
Troubleshooting
Spots or lines missing from the fax
you receive.
Check if the print cartridge is ok by making a copy. See
Maintain the print cartridge
on page 59.
Check with the
telephone company to see if your phone line is noisy.
You are receiving poor quality copies.
The fax machine sending to you may have a dirty scan glass.
Also, check with the telephone company to see if your phone
line is noisy.
Some of the words on the fax you
received appear stretched.
The machine sending to you had a temporary document jam.
Your machine does not make copies.
Make sure your document is loaded face down.
There are lines on copies or
documents you send.
Check your scan glass for marks and clean it (see
Clean the
document scanner area
on page 61.)
The machine dials a number, but fails
to make a connection with a remote
fax machine.
The remote fax machine may be turned off or unable to answer
incoming calls. Speak with the other fax operator to solve the
problem.
You cannot store a document in
memory.
There may not be enough memory available to hold the
document you want to store. If the display shows a
Memory
Full
message, do the following until you can store your
document in memory:
Print all unprinted faxes in memory (see
Reprinting faxes
on
page 52.)
Delete unneeded polling faxes, broadcast faxes, or delayed
faxes (see
To cancel the scheduled job
on page 46.)
Blank areas appear at the bottom of
each page or on continuation pages,
with only a small strip of material
printed at the top.
You may have selected the wrong paper size setting. To select
the proper paper size, see
Paper Size
on page 13.
Image TCR is not working
You have the resolution set to SUPER FINE. Set the resolution to
FINE.
Problem
Solution