HP 4550 Service Manual - Page 156
Installing or changing the control panel overlay, gently pry off the control panel overlay.
View all HP 4550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Note Installing or changing the control panel overlay You might need to install the control panel overlay or replace the English overlay with one that displays your language. You also might need to configure the control panel to display messages in your language. 1 Locate the control panel overlay that came in the printer box and remove it from the bag. If you are installing an overlay, rather than replacing one, skip to step 4. Otherwise continue to step 2. 2 Gently lift out on both sides of the overlay that is currently installed on the printer. 3 Grasp the bottom of the overlay, pull it down, and then lift it out. When removing the control panel overlay, you might want to use a small flat-blade screw driver to gently pry off the control panel overlay. 4 5 4 To install the new overlay, position it over the control panel and install the top side first. Insert the top tabs on the overlay into the slots on the printer face. Then push the overlay up and push in the bottom. 5 Snap the overlay firmly onto the control panel. 154 Removal and replacement C7085-90921