HP 4550 Service Manual - Page 58
Toner Position, Color> = Missing, Ready
View all HP 4550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
7 Slide the toner cartridge down into the slot until the cartridge 7 stops. Note If the cartridge does not slide easily into the slot, ensure that you have the right color cartridge for that slot. 8 Rotate the toner cartridge toward the back of the printer (within the cartridge slot) until the cartridge clicks in place. 8 9 Lower the flap to partially cover the toner cartridge. If the cartridge was rotated correctly, the flap covers the cartridge label. Close the top cover before installing the next toner cartridge. 10 When the top cover is shut, the carousel advances to the next toner cartridge slot. When the printer is ready, the control panel displays: TONER POSITION (COLOR> = MISSING 9 Install the other three toner cartridges by repeating steps 3 through 9. 11 After installing the fourth toner cartridge, close the top cover and press [GO]. Wait while the printer runs an internal color calibration. The calibration takes a few minutes. When the printer is ready, the control panel displays: READY. 10 56 Installation and configuration C7085-90921