HP 4550 Service Manual - Page 56
TONER POSITION, MISSING, READY, If you need to ship the printer, remove the toner cartridges
View all HP 4550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
12 Lower the flap to partially cover the toner cartridge and close the 12 top cover. Note You must close the top cover before installing the next toner cartridge. 13 On the printer control panel, press [VALUE +] once to prepare the printer for installation of the next toner cartridge. When the printer 13 is ready, the control panel displays: TONER POSITION (color) = MISSING 14 Install the other three toner cartridges by repeating steps 3 through12. Install the cartridges in the following order: 1. black (K) 2. magenta (M) 3. cyan (C) 14 4. yellow (Y) 15 After installing the fourth toner cartridge, close the top cover and press [GO]. Wait while the printer runs an internal color calibration. The calibration takes a few minutes. When the printer is ready, the control panel displays: READY. CAUTION If you need to ship the printer, remove the toner cartridges and 15 imaging drum before shipping. 54 Installation and configuration C7085-90921