HP 4550 Service Manual - Page 51
Unpacking the printer, WARNING, CAUTION - itb drawer assembly
View all HP 4550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
1 Unpacking the printer Note Save all of the packing materials in case you need to repack and transport the printer at a later date. WARNING! 2 The base and N model printers weigh approximately 57 kg (125 lb). The DN model weighs 77 kg (169 lb) with Tray 3 and the duplex unit installed. HP recommends having two or more people lift or move any of the printers. 1 Using safe lifting techniques, remove the printer and the printer accessories from the box. 3 CAUTION The prepared location must be level (not more than a 2° angle), able to support up to 77 kg (169 lb), and must support all four corners of the 500-sheet paper feeder (serves as printer base). 2 Place the 500-sheet feeder in the prepared location. CAUTION Avoid bending the guide pins while assembling the printer. 3 Using the guide pins for proper alignment, carefully assemble the printer and accessories.pen the ITB drawer and remove the packing tape, then close the drawer. 4 Open the ITB drawer and remove the packing tape, then close the drawer. 4 C7085-90921 Chapter 3 Installation and configuration 49