HP 4550 Service Manual - Page 205
allow the carousel to drop into place.
View all HP 4550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
29 Standing at the rear of the printer, lift the left side of the carousel while applying pressure toward you to the rear cross-member plate. As soon as the carousel clears the right-side carousel mounting plate, lift and rotate the carousel to your left to clear the assembly (see Figure 6-68). Figure 6-68 Cartridge carousel replacement - lift out the cartridge carousel (6 of 6) 30 When the carousel is out of the engine, remove the 125-tooth gear, bearing and plastic spacer. Install them into the replacement carousel. 31 Install the end of the carousel, opposite the 125-tooth gear into the holder. Rotate and move the carousel down and to the right of the shroud. Apply pressure toward you on the sheet metal to allow the carousel to drop into place. 32 Position the ends of the carousel so that the left side carousel mounting plate fits the plastic hub. Make sure the plastic spacer is still on the shaft with the 125-tooth gear. 33 Assemble in reverse order of disassembly. C7085-90921 Chapter 6 Removal and replacement 203