HP 4550 Service Manual - Page 172
Formatter pan assembly, To remove the formatter pan assembly
View all HP 4550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
Note CAUTION Formatter pan assembly To remove the formatter pan assembly Turn the printer off, wait five seconds, and then unplug the printer. 1 Open the drum drawer (top drawer) until it stops and remove the imaging drum, protecting it from light. Exposure to light for more than 15 seconds can seriously damage the imaging drum. 2 Open the ITB drawer (middle drawer) and Tray 2. 3 Remove the top cover. 4 Remove the right side cover. 5 Remove the right rear cover. 6 Remove the left side cover. 7 Remove the RFI shield. 8 Remove the control panel. 9 Remove the front right cover. 10 Remove the two screws for the connector cover shown in Figure 6-27. Figure 6-27 Formatter pan assembly removal and replacement (1 of 4) 11 Disconnect the two connectors shown in callout 1, Figure 6-28. 170 Removal and replacement C7085-90921