HP 4550 Service Manual - Page 63
Selecting the display language, SELECT LANGUAGE, LANGUAGE=ENGLISH, READY
View all HP 4550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
1 Selecting the display language To change the display language on the printer control panel, do the following: 1 Press and hold [SELECT] on the printer control panel while pressing the standby button (power switch). Continue holding [SELECT] until the control panel displays SELECT LANGUAGE (in English), and then release the [SELECT] key. 2 2 When the control panel displays LANGUAGE=ENGLISH *, press [VALUE] repeatedly until your language choice appears. 3 Press [SELECT] to save your language choice. An asterisk appears next to the selected language. Then press [GO]. 4 After the printer warms up, the control panel displays READY in the selected language. See Table 7-2 on page 217 if an error message appears. 3 Note If the control panel does not display the message in the language you selected, press the printer standby button and repeat the instructions for changing the display language. 4 C7085-90921 Chapter 3 Installation and configuration 61