HP 4550 Service Manual - Page 72
Network configuration, Configuring the printer for the network
View all HP 4550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Network configuration Note Configuring the printer for the network You can configure certain network parameters on the printer from the printer control panel or, for most networks, from the HP JetAdmin Software (or the HP LaserJet Utility for Macintosh). The utilities are provided on the printing software CD-ROM that comes with the printer. You can also set these parameters from the HP Web JetAdmin Software, which is available at http://www.hp.com/go/ webjetadmin. For a complete list of supported networks and for instructions on configuring network parameters from software such as HP JetAdmin and HP Web JetAdmin, see the HP JetDirect Print Server Software Installation Guide. The guide comes on the CD-ROM with printers in which an HP JetDirect 600N print server is installed. If you are configuring network parameters from the printer control panel, the control panel menu appears in the languages listed below. If your language is not listed, the menu will appear in English and you will need to configure the printer by using HP JetAdmin software (or the HP LaserJet Utility for Macintosh). DanishFrenchPortuguese DutchGermanSpanish EnglishItalianSwedish FinnishNorwegian Configuring Novell NetWare frame type parameters The HP JetDirect 600N print server automatically selects a NetWare frame type. Select a frame type manually only when the print server selects an incorrect frame type. To identify the frame type chosen by the HP JetDirect 600N print server, print a configuration page. 70 Installation and configuration C7085-90921