HP 6120XG HP ProCurve Series 6120 Blade Switches Installation and Getting Star - Page 51
Straight-Through Twisted-Pair Cable for 1000 Mbps Network Connections
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Cabling and Technology Information Straight-Through Twisted-Pair Cable for 1000 Mbps Network Connections 1000Base-T connections require that all four pairs or wires be connected. Cable Diagram Note . Pins 1 and 2 on connector "A" must be wired as a twisted pair to pins 1 and 2 on connector "B". Pins 3 and 6 on connector "A" must be wired as a twisted pair to pins 3 and 6 on connector "B". Pins 4 and 5 on connector "A" must be wired as a twisted pair to pins 4 and 5 on connector "B". Pins 7 and 8 on connector "A" must be wired as a twisted pair to pins 7 and 8 on connector "B". Pin Assignments For 1000Base-T operation, all four pairs of wires are used for both transmit and receive. 43
43
Cabling and Technology Information
Straight-Through Twisted-Pair Cable for
1000 Mbps Network Connections
1000Base-T connections require that all four pairs or wires be connected.
Cable Diagram
Note
Pins 1 and 2 on connector “A”
must
be wired as a twisted pair to pins 1 and 2 on connector “B”.
Pins 3 and 6 on connector “A”
must
be wired as a twisted pair to pins 3 and 6 on connector “B”.
Pins 4 and 5 on connector “A”
must
be wired as a twisted pair to pins 4 and 5 on connector “B”.
Pins 7 and 8 on connector “A”
must
be wired as a twisted pair to pins 7 and 8 on connector “B”.
.
Pin Assignments
For 1000Base-T operation, all four pairs of wires are used for both transmit and receive.