HP 6120XG HP ProCurve Series 6120 Blade Switches Multicast and Routing Guide - Page 56
Example of Setting the ARP Age Timeout to 1000 Minutes, Example of show ip Command Displaying ARP Age
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
IP Routing Features Overview of IP Routing You can increase the ARP age timeout maximum to 24 hours or more with this command: Syntax: [no] ip arp-age Allows the ARP age to be set from 1 to 1440 minutes (24 hours). If the option "infinite" is configured, the internal ARP age timeout is set to 99,999,999 seconds (approximately 3.2 years). An arp-age value of 0 (zero) is stored in the configuration file to indicate that "infinite" has been configured. This value also displays with the show commands and in the menu display (Menu > Switch Configuration > IP Config). Default: 20 minutes. ProCurve(config)# ip arp-age 1000 Figure 3-2. Example of Setting the ARP Age Timeout to 1000 Minutes To view the value of ARP Age timer, enter the show ip command as shown in Figure 3-3. ProCurve(config)# show ip Internet (IP) Service IP Routing : Disabled Default Gateway : 15.255.120.1 Default TTL : 64 Arp Age : 1000 Domain Suffix : DNS server : VLAN | IP Config IP Address Subnet Mask Proxy ARP DEFAULT_VLAN | Manual 15.255.111.13 255.255.248.0 No Figure 3-3. Example of show ip Command Displaying ARP Age You can also view the value of the ARP Age timer in the configuration file. 3-10