HP 9040 HP LaserJet 9040mfp/9050mfp - Software Technical Reference (external) - Page 227

are available in the media-size list on the Advanced tab in the Document Defaults driver tabs. This constraint prevents (or reduces the likelihood of) tying up the printer with media-mount messages that occur when users request sizes or types that are not available. The trays listed in the Form to Tray Assignment setting include standard trays and optional accessory trays. Generally, items that are installed separately have a separate Installable Options setting. For example, for the HP LaserJet 9040/9050mfp, trays 1 and 4 are listed in both the Form to Tray Assignment setting and the Installable Options setting. The input trays listed here are also listed as media sources on the Paper/Quality tab. Configuring the trays 1 Select the appropriate tray in the Form to Tray Assignment list. 2 Use the drop-down menu to select the media size (or form) that is loaded in that tray. 3 Repeat steps 1 and 2 for the remaining trays. 4 Click OK to enable your settings, or, if necessary, click the Cancel button to reconfigure all the trays, and remove the size and type constraints that have been imposed on the Paper/Quality tab. External Fonts NOTE The External Fonts option is available only in the HP PCL 6 and HP PCL 5 Unidrivers. It is not available in the PS Emulation Unidriver. Use the External Fonts option to install and remove external fonts for the product. External fonts can be soft fonts or DIMM fonts. Clicking the External Fonts option causes the Properties button to appear. Clicking the Properties button opens the HP Font Installer dialog box, which is shown in the following illustration. Figure 4-19 HP Font Installer dialog box HP PCL 6, HP PCL 5, and PS Emulation Unidriver features 211