HP 9050 HP LaserJet 9040mfp/9050mfp - Software Technical Reference (external) - Page 157

NOTE When using font cards with the HP Traditional PCL 5 and HP Traditional PCL 6 drivers: To install screen fonts that match the font card, use the .HPB file that is specifically designed to work with that card. If no screen fonts exist for the card, use the .PCM file that is specifically designed to work with that card. Include types in application source list NOTE The Include types in application source list check box is available only when using a computer that is running Windows NT 4.0. When the Include types in application source list check box is selected, all media types (such as heavy media and transparencies) are available from the Source is: list on the Paper tab. When you are in a software program, you can open the Paper tab by clicking Print from the File menu, and then clicking Properties. Ignore Application Collation This setting overrides collation options that are selected in the print options of a software program. When Ignore Application Collation is selected, the print driver collates in the most appropriate way for the print job. The performance of this feature depends on the software program that you are using. Printer memory The Total Memory group box shows the total amount of memory that is physically installed in the product. The default values for total product memory are specified on the Configuration tab. Total product memory is updated through a successful bidirectional query, or can be set manually. The Driver Work Space (DWS) value shows the amount of memory that is available for keeping track of fonts that are downloaded from the driver. The driver deletes downloaded fonts if it has exceeded the available memory value. The (DWS) value is a dynamic value that varies depending on the specific configuration of the product. An accurate (DWS) value optimizes driver performance. The HP Traditional PCL 6 and HP Traditional PCL 5 drivers automatically configure the (DWS) value in Windows 98, Windows Me, and Windows NT 4.0 environments that support bidirectional communication. Use the (DWS) option to specify the amount of work-space memory that is available to the product. To manually set the (DWS) value, print a Configuration page and find the DWS value in the Memory section of the page. Then, click the More... button on the Configuration tab, and type the DWS value in the (DWS) field of the More Configuration Options dialog box. Alternative Letterhead Mode When selected, this option enables you to always load letterhead or pre-printed paper the same way for all print jobs, whether you are printing on one side of the sheet or both sides of the sheet. Load the paper as you would for printing on both sides. If the printer tray has an icon that indicates to load paper either face-up or face-down, load the paper opposite of the orientation shown. When this option is selected, the printer speed slows to the speed required for printing on both sides. Automatic configuration If you have modified the configuration of the HP LaserJet 9040/9050mfp since installation, click the Update Now button to automatically reflect the new configuration in the driver. For more information about the print driver's automatic configuration feature, see the Driver Configuration section of this guide. HP traditional PCL 6 and PCL 5 driver features 141