HP Armada 7300 Armada 7300 Family of Personal Computers Reference Guide - Page 133

Solving Modem Problems, Problem, Possible Cause, Solution, To disable Call Waiting

Get HP Armada 7300 - Notebook PC PDF manuals and user guides View all HP Armada 7300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 133 highlights

Solving Modem Problems Continued Problem Possible Cause Solution Modem loses connection. Characters are garbled or transfer rates are slow. Cellular connection doesn't work (North America only). The cable connection Verify that the modem is loose. cable is securely connected. Call Waiting has not been disabled. To disable Call Waiting within Windows, doubleclick Modems in Control Panel. Click the General tabÆDialing PropertiesÆMy Locations. Contact your local phone company if you do not know the code to disable Call Waiting. Hang-up Delay S Register (S10) is set too low and noise on the line is causing the modem to disconnect. To change S10 default to 150: Go to HyperTerminal Command Mode, type ATS10=150, then press Enter. There is noise in the telephone line. Verify that the modem cable is securely connected. Request a telephone line filter from your local telephone company. Environmental factors Refer to the online are interfering with the Modem Help. connection. Troubleshooting 17-15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
Troubleshooting
17-15
Solving Modem Problems
Continued
Problem
Possible Cause
Solution
Modem loses
connection.
The cable connection
is loose.
Verify that the modem
cable is securely
connected.
Call Waiting has not
been disabled.
To disable Call Waiting
within Windows, double-
click Modems in Control
Panel. Click the General
tab
˘
Dialing Proper-
ties
˘
My Locations.
Contact your local phone
company if you do not
know the code to disable
Call Waiting.
Hang-up Delay S
Register (S10) is set
too low and noise on
the line is causing the
modem to disconnect.
To change S10 default to
150:
Go to HyperTerminal
Command Mode, type
ATS10=150, then press
Enter.
Characters are
garbled or transfer
rates are slow.
There is noise in the
telephone line.
Verify that the modem
cable is securely
connected.
Request a telephone line
filter from your local
telephone company.
Cellular connection
doesn’t work (North
America only).
Environmental factors
are interfering with the
connection.
Refer to the online
Modem Help.