HP Color LaserJet Managed MFP E77822-E77830 On-Site Installation Guide - Page 76
Adjusting the ADF Skew, Adjusting the flow ADF and ADF Skew
View all HP Color LaserJet Managed MFP E77822-E77830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Adjusting the ADF Skew Adjusting the flow ADF and ADF Skew 1. Open the ADF. Loosen the two screws securing both hinges. Figure 7-11 Open ADF and loosen screws 2. Adjust the position of the ADF hinge according to the skew status. Figure 7-12 Adjust ADF hinge a. If the skew image is similar to the following example, adjust the hinge unit in the direction of the arrow. (1 scale = >1.0 mm skew adjustment) 70 Chapter 7 On-site final setup ENWW
Adjusting the ADF Skew
Adjusting the flow ADF and ADF Skew
1.
Open the ADF. Loosen the two screws securing both hinges.
Figure 7-11
Open ADF and loosen screws
2.
Adjust the position of the ADF hinge according to the skew status.
Figure 7-12
Adjust ADF hinge
a.
If the skew image is similar to the following example, adjust the hinge unit in the direction of the
arrow. (1 scale = >1.0 mm skew adjustment)
70
Chapter 7
On-site final setup
ENWW